DM350MR Micro heat adsorption air dryer
Heatless Desiccant Air Dryer The thermal regeneration adsorption dryer uses "pressure swing adsorption" to achieve the drying effect. Due to the inverse ratio between the ability o…
Technical Specifications
Standard parameters for the DM350MR Micro heat adsorption air dryer series. Custom configurations available.
Heatless Desiccant Air Dryer
The thermal regeneration adsorption dryer uses “pressure swing adsorption” to achieve the drying effect. Due to the inverse ratio between the ability of air to hold water vapor and pressure.After drying, a portion of the air (called regenerated gas) is depressurized and expanded to atmospheric pressure. This pressure change makes the expanded air drier and then allows it to flow through the desiccant layer that is not connected to the airflow (i.e. a drying tower that has absorbed sufficient water vapor), and the moisture in the dried regeneration gas desiccant, will be taken out of the dryer to reach.For the purpose of dehumidification.
| Purge air | ≤12~15% |
| Power | 220 V/50Hz |
| Inlet temperature | 0~45℃ |
| Working periods | T=4~20min |
| Desiccant | Activated aluminum + Molecular sieve |
| Outlet air pressure dew point | -20~-40℃ |
| Inlet oil content | ≤0.1mg/m³ |
| Working pressure | 0.6~1.0Mpa |
| Parameter | Capacity (Nm³/min) | Air connection | Net weight (Kg) | Length (mm) | Width (mm) | Height (mm) |
| DM15WR | 1.5 | ZG1″ | 125 | 750 | 350 | 1450 |
| DM26WR | 2.6 | ZG1.5″ | 180 | 750 | 350 | 1640 |
| DM40WR | 3.8 | ZG2.0″ | 285 | 1000 | 500 | 1518 |
| DM65WR | 6.5 | ZG2.0″ | 420 | 1000 | 450 | 1980 |
| DM85WR | 8.5 | ZG2.0″ | 550 | 1100 | 500 | 1910 |
| DM110WR | 11 | DN65 | 650 | 1100 | 500 | 2060 |
| DM135WR | 13.8 | DN80 | 750 | 1200 | 550 | 2100 |
